N E W 5 - O C T A V E H A R P S I C H O R D S
I N T H E N E A P O L I T A N S T Y L E
Mounting the Soundboard Rosette Levels
Positioning level 2
Before glueing level 2 to the paper separator tabs it was necessary to position the layer so that its pattern coincided with the pattern of level 2. This was done using small paper clips as clamps to hold the layers in place temporarily. Once positioned correctly the rosette was turned over and as many tabs as possible were glued to the back of level 2. The clips were then removed and the rest of the tabs were glued down.
Go back to the section on mounting the Neapolitan harpsichord rosettes
